Loading...
Red RC - RC Car News |
Dash R-Tune V3 modified brushless motor Posted: 30 Mar 2020 08:30 AM PDT Following a first teaser image Dash have officially unveiled their new R-Tune V3 modified brushless motor. The next generation of the R-Tune features a high airflow aluminium can with arrow-shaped cut-outs for improved cooing efficiency, a lower weight and minimized power fading during a run even in high ambient temperatures. In addition the can also features a special slot to meet the homologation requirements of IFMAR, ROAR and EFRA. The V3 motor will feature the same 2019 Reedy Race winning stator for a much lower internal resistance, an increase in torque and overall performance. The motor also features a balanced 12.3mm rotor to ensure a smooth power delivery with optional rotors being available to fine-tune the characteristics of the motor. The V3 will hit stores in 4.5T and 5.0T winding variants. Source: Dash [dash-rc.com] The post Dash R-Tune V3 modified brushless motor appeared first on Red RC. |
Sunpadow 2S 4200mAh ultra-narrow LCG LiPo pack Posted: 30 Mar 2020 07:14 AM PDT Sunpadow keep growing their new Platin competition LiPo battery range with the latest addition being a ultra-narrow LCG pack. Adapting the new 36mm wide ultra-narrow design specially developed for mid-motor touring cars the 4200mAh pack is only 20mm tall, ensuring not only a very centralised weight balance but also a lower centre of gravity due to the battery’s reduced weight compared to its 5200mAh sibling. The pack weighs in at 191g, further reducing vehicle weight and allowing to add weight where it is needed. Source: Sunpadow [sunpadow.com] The post Sunpadow 2S 4200mAh ultra-narrow LCG LiPo pack appeared first on Red RC. |
Xray XB8 medium & hard 1g aluminium clutch shoes Posted: 30 Mar 2020 06:58 AM PDT Xray have introduced their new medium and hard aluminium clutch shoes for the 4-shoe clutch of the XB8, XT8 and GTX8 kits. The medium clutch shoe offers increased slippage and a late engagement at higher revs while the hard clutch shoes make for the latest clutch engagement available from Xray‘s range so far and thus highest bite RPM. Both weigh in at 1g per piece and they are available as separate 4-piece packs. Source: Xray [teamxray.com] The post Xray XB8 medium & hard 1g aluminium clutch shoes appeared first on Red RC. |
P-One RS4 190mm touring car body shell Posted: 30 Mar 2020 06:20 AM PDT P-One have introduced their all-new RS4 touring car body shell for 190mm chassis. Designed to compete with the latest breed of high downforce bodies, P-One’s lid features a low-profile design with a large front splitter, a round grille/hood transition, a pretty aggressive cab forward design as well as a long trunk section with reinforcement ribs for stability. The body is made of clear high-quality polycarbonate and it will hit stores soon. Source: P-One [p-one-racing.com] The post P-One RS4 190mm touring car body shell appeared first on Red RC. |
Klinik RC 22T 4.0 to 5.0 carbon front shock tower Posted: 30 Mar 2020 05:31 AM PDT Made for TLR’s 22T 4.0 stadium truck is a 3mm carbon fibre front shock tower from Klinik RC. The design allows to use the 5.0 front bulkhead, steering and more on the 4.0 truck. In addition the shock stay, which is made of high-quality 3mm carbon fibre, is super lightweight, coming in at just over 7g. Source: Klinik RC [klinikrc.com] The post Klinik RC 22T 4.0 to 5.0 carbon front shock tower appeared first on Red RC. |
Kingmax BLS7013 ultra high torque servo – Coming soon Posted: 30 Mar 2020 03:56 AM PDT Kingmax have announced the soon release of their new ultra high torque BLS7013 servo. The high-voltage capable servo offers up to 70kg-cm of torque at a speed of down to 0.13s at 7.4V input. Usable for heavy duty 1/8th scale applications such as on-road, off-road and monster trucks the servo will feature a heavy duty, heatsink design case in a 2-tone finish. Full details will become available in time of the release. Source: Kingmax [kingmaxhobby.com] The post Kingmax BLS7013 ultra high torque servo – Coming soon appeared first on Red RC. |
Yeah Racing Momentum tool line – Coming soon Posted: 30 Mar 2020 01:56 AM PDT Coming soon from Yeah Racing is their new Momentum tool line that was developed in cooperation with former IFMAR World Champion, Atsushi Hara. The range will include wrenches and drivers, setup tools like ride height and droop gauges as well as accessories such as a car stand. Full information about the innovative tool line will become available soon. Source: Yeah Racing [yeahracing.com] The post Yeah Racing Momentum tool line – Coming soon appeared first on Red RC. |
RCLyfe 22 series V2 laydown carbon motor plate Posted: 30 Mar 2020 01:14 AM PDT Made for TLR’s 22 series 2WD vehicles using a laydown gearbox setup is RCLyfe’s new V2 carbon fibre motor plate. Designed to reduce weight by over 50 percent over the stock aluminium plate, the motor mount also allows for better motor cooling by enabling air to pass through the front of the motor. The plate weighs in at only 4.9g and it is usable with the 22 5.0 and 4.0 kits, the 22T 4.0 as well as the 22SCT 3.0 with laydown transmission. Source: RCLyfe [rclyfe.com] The post RCLyfe 22 series V2 laydown carbon motor plate appeared first on Red RC. |
VSR Products Unicorn VRC Pro adapter Posted: 30 Mar 2020 12:06 AM PDT VSR Products have introduced a new adapter that allows to use the popular VRC Pro software using any 4-channel 2.4GHz receiver. With the current Corona pandemic tracks have been forced to close and people need to stay at home as much as possible meaning racers are looking for alternatives to getting some laps under their belts. This is where the old and trusted VRC Pro RC racing simulator kicks in. VSR Products Unicorn PC adapter supports 4-channel operation which means owners can setup marshalling, refuelling and other functions with the buttons on the radio and do not have to touch the keyboard. In addition the adapter offers higher frame rates and lower latency compared to the original VRC adapter. Not included are the needed receiver and Micro USB cable. Source: VSR Products [vsr3d.com] The post VSR Products Unicorn VRC Pro adapter appeared first on Red RC. |
T-Works MP10/MP9 series alloy centre bulkhead Posted: 29 Mar 2020 11:47 PM PDT Coming from T-Works and made for Kyosho’s Inferno MP10 and MP9 series vehicles is an aluminium centre bulkhead set. The single piece gearbox halves are machined from high-quality 7075-T6 aluminium for exceptional strength and they feature a black surface coating for wear and looks as well as machined silver edge details. The parts are direct replacements for the standard bulkhead of the MP10 and MP10T as well as the MP9 TKI4 and TKI3 kits and it comes including gold-color mounting hardware and separate bearing seats for durability. Source: T-Works [rc-tworks.com] The post T-Works MP10/MP9 series alloy centre bulkhead appeared first on Red RC. |
You are subscribed to email updates from Red RC. To stop receiving these emails, you may unsubscribe now. | Email delivery powered by Google |
Google, 1600 Amphitheatre Parkway, Mountain View, CA 94043, United States |
Loading...
Loading...