Red RC - RC Car News

Following the black colour Fin turnbuckle kit for the TLR 22X-4 4WD buggy, JConcepts have also introduced a set for the TLR 22 5.0 2WD buggy. The base of the design is centred around a 4mm titanium hex size which gradually tapers down into a 3.5mm thread base design which accepts the standard TLR ball-cup configuration. The focus of the styling surrounds the lengthened adjustment hex area and the finned cuts that rotate about the centre. The turnbuckles are lightweight, they are produced with left- and right-hand threads with the left being conveniently marked for easy orientation, and a black colouring gives the stealthiest look in the pits and on the track.

Source: JConcepts [jconcepts.net]

The post JConcepts 22 5.0 Fin black turnbuckle kit appeared first on Red RC.

Associated Electrics have introduced the new Reedy S20 T-shirt in black colour. The shirt is made of 100 percent pre-shrunk cotton and available in adult S to 3XL sizes. Stylish Reedy graphics emblazon the front and back.

Source: Associated Electrics [associatedelectrics.com]

The post Reedy S20 T-shirt appeared first on Red RC.

Coming from JConcepts and made for the TLR 22X-4 4WD buggy is the Fun titanium turnbuckle kit in black colour. The base of the design is centred around a 4mm titanium hex size which gradually tapers down into a 3.5mm thread base design which accepts the standard TLR ball-cup configuration. The focus of the styling surrounds the lengthened adjustment hex area and the finned cuts that rotate about the centre. The turnbuckles are lightweight, they are produced with left- and right-hand threads with the left being conveniently marked for easy orientation, and a black colouring gives the stealthiest look in the pits and on the track.

Source: JConcepts [jconcepts.net]

The post JConcepts 22X-4 Fin black turnbuckle kit appeared first on Red RC.

Coming soon from WRC Racing is their new LM16.3 1/10th scale pan car kit. The car is based off of the F18.3 and features a multi-functional battery compartment that allows the use of both inline and transversal battery positions, it includes a redesigned chassis and a new, aerodynamic 7075-T6 aluminium front bumper support. The kit is rounded out by a new ball differential.

Source: WRC Racing [wrc-racing.com]

The post WRC Racing LM16.3 1/10th pan car kit appeared first on Red RC.

The Levante Cup was held at the Circuito de Silla track this past weekend. In the single 2WD Buggy class it was Joan Espasa with the overall TQ after winning two of the three qualifiers and also bagged the overall victory early with wins in A1 and A2, leaving behind Marcos Abarca in 2nd and Jaime Casanayor in 3rd.

Source: Shark Racing Products [sharkracingproducts.com]

The post Joan Espasa wins at Levante Cup appeared first on Red RC.

The 2020 Greek 1/8th Nitro GT Championship was held at the Fanatix Racing Track in Athens this past weekend. The race attracted a total of 17 entries and was held in hot summer weather conditions. In qualifying Kostas Sidiropoulos (SWorkz) was able to take the pole position in front of Michalis Xristodoulou (Mugen) and Konstatinos Terlepanis (Serpent). In the 45-minute A-final Sidiropoulos took an early lead showing good pace but nitro newcomer Dimitris Ioannidis (Xray) was able to take advantage of his long stints to take the lead for a couple of laps before retiring with a mechanical failure. From that moment on Sidiropoulos established himself in the lead, lapping the field twice to take the win and with it the 2020 Greek Nitro GT title. Starting from 8th on the grid Konstatinos Agrafiotis (Xray) finished on a popular 2nd place with Konstatinos Terlepanis rounding out the podium.

Source: Kosmos RC News [facebook.com]

The post Kostas Sidiropoulos takes Greek Nitro GT title appeared first on Red RC.

Phat Bodies from the UK have introduced their new VTCR body shell for 1/10th scale front-wheel drive chassis. The scale-like body has been based on the cars that run in the WTCR and BTCC championships with similar styling and aerodynamics cues. Key features are a double front splitter balanced with a BRCA-legal rear wing for a car that’s fast and easy to drive. The prototype was extensively tested over the last six months by Phat Bodies’ team of test drivers, some pro and and some regular club drivers, ran on everything from tight and grippy indoor carpet tracks to fast and open outdoor tarmac tracks and even in the rain to ensure the body performs in every track condition. The lid is fully BRCA approved, meets the international 125mm roof height and comes in crystal clear Lexan polycarbonate for high quality and durability. Included come vinyl window masks, lights and grille stickers as well as the rear wing.

Source: Phat Bodies [phatbodies.co.uk]

The post Phat Bodies VTCR FWD touring car body shell appeared first on Red RC.

Xtreme Aerodynamics have announced the addition of multi-time IFMAR World and EFRA European champion Bruno Coelho to their racing team. Bruno will deck out his Xray on-road rides with the Xtreme Aerodynamics body shells from now on.

Source: Xtreme Aerodynamics [xtremeaerodynamics.it]

The post Bruno Coelho teams up with Xtreme Aerodynamics appeared first on Red RC.

Infinity have introduced their new snap ring pliers for the use with 10mm to 50mm internal and external snap rings. The pliers include three tool tips of 0, 45 and 90 degrees that help to reach basically every mounting position. The pliers allow for easy attachment and removal and they are available from now on.

Source: Creation Model [creationmodel.net]

The post Infinity snap ring pliers appeared first on Red RC.

Rc Arlos Factory have released first images of their forthcoming new RcA-V1 RWD drift car chassis kit. The first chassis project of the company will feature a highly adjustable suspension components, a rear motor design placed in front of the rear axle as well as mock-up brace callipers and rotors for scale looks. The car will allow for 240mm, 257mm and 275mm wheelbase settings and we bring you more details as they become available.

Source: Rc Arlos Factory [rc-arlos.com]

The post Rc Arlos Factory RcA-V1 RWD drift car chassis appeared first on Red RC.