Loading...
Red RC - RC Car News |
Ruddog R2167 tuned exhaust pipe Posted: 17 Sep 2020 06:53 AM PDT The new Ruddog R2167 tuned exhaust pipe was developed together with their racing team to ensure optimised performance in combination with the RNX21.3 nitro off-road engine. The EFRA2167 homologated pipe offers exceptional torque and top end speed as well as low fuel consumption, ensuring balanced performance for all types of tracks and track conditions. Included with the polished pipe comes an L50 manifold that further supports the overall performance of the exhaust system. Source: Ruddog [ruddog.eu] FacebookTwitterThe post Ruddog R2167 tuned exhaust pipe appeared first on Red RC. |
Posted: 17 Sep 2020 02:51 AM PDT Rêve D have announced the upcoming release of their new MC-1 conversion kit for the YD-2. The car that won the R.C.D.C. All Japan E-Drift Championship as a prototype is finally ready. Rêve D main designer Hayato Matsuzaki, together with the development team and team drivers all worked together to further refine the kit and after almost a year it’s ready. 2.5mm thick carbon material is used for the main chassis, upper deck & vertical deck to optimise pitch & roll rigidity. The aluminium gear case, which has succeeded in reducing the weight to the utmost while maintaining rigidity, has been designed so that the gear differential unit can be easily attached and detached, achieving outstanding maintainability. The new motor plate design allows you to select the motor height in 3 steps without removing the spur gear unit, making it easy to change the settings. The MC-1 conversion will be available in 2 versions, the slide rack spec or the bell crank (wiper) spec. Source: Rêve D [teamreved.com] FacebookTwitterThe post Rêve D MC-1 conversion kit appeared first on Red RC. |
Team Powers high airflow cooling fan Posted: 17 Sep 2020 02:28 AM PDT Team Powers have introduced the latest version of their high airflow cooling fan. The casing has been machined from 7075 aluminium and sports 2 screw holes in the base so it can be mounted to the chassis directly, while a high magnet core prevents the fan from stopping when it’s too close to car’s motor. The fan is 30mm x 30mm and is 12mm thick which is an extra 2mm compared to the previous version for improved air flow. Source: Team Powers [team-powers.com] FacebookTwitterThe post Team Powers high airflow cooling fan appeared first on Red RC. |
RC Maker T4’20 carbon hub extension plates Posted: 17 Sep 2020 01:30 AM PDT RC Maker have developed some beefed up extension plates for the Xray T4’20 alu steering hubs. They have also integrated an M3 pressed insert which completely does away with the nut on top of the arm. There’s specific versions for front and rear to maximise strength in each position whilst ensuring required clearance from hubs/wheels. Compared to stock the new plates are thicker at 3mm and have the inner link position removed, while the new profile of the arm has increased strength and flex. Source: RC Maker [rcmaker.com.au] FacebookTwitterThe post RC Maker T4’20 carbon hub extension plates appeared first on Red RC. |
Rebellion RC body distance system Posted: 17 Sep 2020 01:14 AM PDT New from Rebellion RC comes their body distance system which supports the body shell directly over the front wheels. The system is mounted to the car’s c-hub and its adjustable design makes it possible to fine-tune the mounting height of the body. Because the body no longer moves up and down with the chassis you can position the body lower than ever before, which in turn improves aerodynamics. The black holders directly replace the original 2mm shims under the pivot ball like those found on the T4. The set comes supplied with plastic end-caps for improved body longevity. Source: Rebellion RC [rc-carbonstore.com] FacebookTwitterThe post Rebellion RC body distance system appeared first on Red RC. |
Pro-Line tease 1/8th Axis body shells Posted: 16 Sep 2020 01:00 PM PDT Pro-Line are teasing the upcoming release of three new 1/8th scale buggy shells. The Axis line of buggy bodies has to this point only been available for 1/10th scale but that style will be crossing over to its bigger brother with Pro-Line set to release the new shell initially for the Mugen MBX8, TLR 8ight-X and Associated RC8B3.2. More information as we receive it. Source: Pro-Line [prolineracing.com] FacebookTwitterThe post Pro-Line tease 1/8th Axis body shells appeared first on Red RC. |
You are subscribed to email updates from Red RC. To stop receiving these emails, you may unsubscribe now. | Email delivery powered by Google |
Google, 1600 Amphitheatre Parkway, Mountain View, CA 94043, United States |
Loading...
Loading...