Red RC - RC Car News

Creation Model have introduced this new 5×10 shim set for their line of gas powered cars. This shim set is mainly used to adjust the clutch clearance and the 5.1 x 9.8mm shims come in 0.1, 0.2, 0.3mm thicknesses, with ten pieces of each included. The set also comes with a decal for use on the Infinity small-parts box that was released some weeks ago.

Source: Creation Model [creationmodel.net]

The post Infinity 5×10 clutch shim set appeared first on Red RC.

This year’s Messse(Statt)-Cup Leipzig, normally held indoors as part of the Modell Hobby Spiel fair, was this year taken outdoors as the Corona virus restrictions meant the original plan couldn’t go ahead. Thankfully the weather was good and the 3-day event hosted by MRC Leipzig went ahead without any problems. Qualifying in 1/8th Nitro saw Burak Kilic (Mugen) take the top spot ahead of Aaron Rönick (Associated) and Johannes Klett, while in EP Buggy, it was again Burak, this time ahead of Sophie Müller (Sworkz) and Steve Krause (Kyosho). The top 3 in EP remained the same after the three 10 minute mains with Burak taking the win ahead of Sophie and Steve. In the 30 minute Nitro final Burak Kilic was again the person to beat and he was joined at the front by his brother Berkan (Mugen), the pairing winning their respective semi finals to line up first and second. Burak would win by under a lap over his brother Berkan with Aaron Rönick completing the podium in 3rd.

Thanks to Abdullah Kilic for the report

The post Burak Kilick double at Messe(Statt)-Cup Leipzig appeared first on Red RC.

This past weekend the final round of the Austrian 1/8th IC championship took place at the beautiful Morac-Ring. In the low grip conditions it was Xray driver Nejc Mihelic who took the TQ followed by Herfried Pucher and Tobias Sutrich. In the very even superpole battle it was Tobias who joined Mihelic as the direct qualifier in the finals. Having found a reliable and fast setup in the direct finalist training Mihelic set with the fastest lap of the weekend on his way to another win in front of Herfried Pucher and Patrick Schweinzer. The result ensured Nejc Mihelic was crowned Austrian champion, followed by Herfried Pucher and Leonardo Varga.

Source: Xray [teamxray.com]

The post Mihelic is 2020 Austrian National 1/8th onroad champion appeared first on Red RC.

The 5th and final round of the Czech Open series 2020 took place last weekend at the RC Klub Kolin track. The weather forecast was very promising for the race and we had nice sun all day, but the heavy rains in the days leading up to the event made the track wet even for the race, so there were no problems with dust or low traction. In Nitro Max Gotzl managed to take the TQ with the fastest time in qualifying with his Xray XB8, with Jiri Mara (Sworkz) placed 2nd and Jan Horacek 3rd. In the Ebuggy class Jiri Benes took the TQ in front of Jiri Dvorak and Jan Domansky. The start of the 30 minute main final got off to a rough start for pole sitter Gotzl as he made a mistake on the opening lap, but a few laps later he was able to pass Jiri and finish the race in first place with a comfortable gap. Mara took the runner up spot with Jan Hujer finished 3rd overall. In Ebuggy the top 3 after qualifying had the exact same points after the three finals, but Jiri Dvorak with a faster time took the Win in front of Jiri Benes, and Jan finished 3rd.

This was the last race of the season, so we also had the overall championship prize-giving ceremony. Max Gotzl was able to take both titles, Nitro and Ebuggy with the highest points. With 3 races were counting Max took 3 TQ+Wins with both cars. In Nitro Tomas Kapicka was 2nd and Martin Vins 3rd, with Ebuggy Jiri Dvorak took the 2nd place and Jiri Benes 3rd.

Overall championship nitro results:
1. Gotzl Max – Xray XB8
2. Kapicka Tomas
3. Vins Martin

Overall championship Ebuggy results:
1. Gotzl Max – Xray XB8E
2. Dvorak Jiri
3. Benes Jiri – Xray XB8E

Source: Xray [teamxray.com]

The post Max Gotzl takes Rd5 & overall Czech Open series appeared first on Red RC.

Coming soon from Tamiya, the TA07 MSX chassis kit is their latest single belt 4wd 1/10th scale chassis. An evolution of the TA07 MS, the car features a new 2.25mm thick carbon fibre chassis and 2.0mm thick aluminium chassis to help dial it in to various track conditions. Using a vertically mounted 2.0mm thick upper deck, it creates improved roll characteristics while ensuring pitching rigidity. In addition, two motor positions with different traction characteristics can be selected and as with the TRF420 the suspension mounts use inserts for fine adjustment. The front and rear pulleys are the same as the TRF420 as are the SSBB dampers and to that end there is new 3mm thick carbon fibre shock towers front and rear.

Source: Tamiya [tamiya.com]

The post Tamiya TA07 MSX chassis kit appeared first on Red RC.

New from T-Works for the Team Losi Racing 22X-4 and its predecessor, are these drive shaft safety collars. Replacing the kit standard composite CVA sleeves, these versions are made from black anodised aluminium and sport the T-Works logo. Available in 6 or 2 piece sets.

Source: T-Works [rc-tworks.com]

The post T-Works 22X-4 driveshaft safety collars appeared first on Red RC.

Sweep Racing have introduced their all new Spiral 1.9″ aluminium rock crawler bead lock wheels. Featuring a unique 10 spoke design with 12mm hex for 10th scale rock crawler chassis’ they also include 5 air holes on the outer ring in order to allow air into tires. Available in silver and grey and will work great with the soon to be released 1.9″ rock crawler tires from Sweep.

Source: Sweep [sweepracing.com]

The post Sweep Racing Spiral 1.9″ aluminium bead lock wheels appeared first on Red RC.