Loading...
Red RC - RC Car News |
Tekno RC ET48 2.0 1/8th 4wd EP truggy Posted: 12 Apr 2021 05:26 AM PDT Following the recent introduction of the EB/NB48 2.0 buggies, it was only a matter of time until Tekno incorporated all of the cool features into an all-new truck platform. The ET48 2.0 shares many of the parts and design elements first introduced on the buggy. A primary goal of this project was to minimise the additional parts needed to help keep drivers on the track or bashing at their favourite spot. You will find that quite a few of the parts you already have will work on the new ET48 2.0. They carried over features first seen with the 2.0 buggies such as the industry-first suspension arms with built-in caster. This allows a longer overall arm length, ideal front-end geometry and increased durability. It has rear hubs that provide roll centre adjustments by adjusting the axle height and they carried over the active rear toe system. A substantial amount of time was invested in developing the smoothest suspension package available to make the truck a breeze to drive in the roughest conditions. They also brought over the quick access differentials with increased volume that improves consistency and efficiency with minimal maintenance time. And naturally, it has the extreme toughness as well as the great handling that Tekno RC vehicles are known for. The ET48 2.0 body has an industry-first exposed front shock tower design as well as a more truck-like appearance. The body is lighter, creates more downforce for increased steering response, flies through the air with greater ease and closer resembles a full size vehicle. Finally, during testing, the body was found to last longer than “standard” truggy bodies. Features Source: Tekno RC [teknorc.com] FacebookTwitterThe post Tekno RC ET48 2.0 1/8th 4wd EP truggy appeared first on Red RC. |
Posted: 12 Apr 2021 05:23 AM PDT From Infinity comes this curved scissors, perfect for cutting out bodyshells. Seen before in many different guises, these curved scissors are ideal for cutting polycarbonate bodyshells with the curved cutting edge of these scissors making it simple and easy to cut wheel arches. Sporting a red handle and black blades the latter are branded with the Infinity logo. Source: Creation Model [creationmodel.net] FacebookTwitterThe post Infinity curved scissors appeared first on Red RC. |
Hasi Tuned .21 engine venturis Posted: 12 Apr 2021 02:03 AM PDT Following extensive testing, Hasi Tuned engines are pleased to present their newest development, a range of engine venturis. These new .21 Venturi come in a range of sizes of 8.0, 8.5 and 9.0mm and they claim to improve the bottom end torque and middle rpm range allowing the engine to run to max performance. Red anodised, the venturi fits OS, Max Power and Novarossi based engines. Source: Hasi Tuned [facebook.com] FacebookTwitterThe post Hasi Tuned .21 engine venturis appeared first on Red RC. |
Carbognani & Tolomelli win Italian 1/12th season opener Posted: 12 Apr 2021 01:04 AM PDT The 2021 edition of the Italian 1/12th scale Championship kicked off last weekend in RC Landia, Scandiano. The race was held under the official safety protocols that ACI Sport has agreed with the National Authorities, which is allowing races to go ahead regularly at National level. The Championship will be run over 4 rounds across Italy, exclusively on indoor carpet tracks, and is catering two classes: GT12, run according to the popular BRCA/EFRA rules, and LMP Modified. In GT12, Guido Carbognani took a dominant win ahead of Mattia Dall’Oca and Luca Tassinari, while n LMP Modified, it was Alessio Tolomelli scoring a perfect day with TQ, best lap and ultimately the win ahead of Marcello Galli and Marco Mazzini. Coming up next, on May 30th, the second round of the Championship will be hosted by RMT Torino on CRC Carpet. Source: ACI Sport [acisport.it] FacebookTwitterThe post Carbognani & Tolomelli win Italian 1/12th season opener appeared first on Red RC. |
Fenix Racing Classique 2 F1 chassis Posted: 12 Apr 2021 12:53 AM PDT Fenix Racing have introduce the Classique 2, a follow up to their chassis designed specifically for the brand’s Classique line of F1 bodyshells. The biggest improvement over its predecessor is the ability to use the most popular LiPos, from Super Shorty, to Shorty to LCG Shorty. Another improvement is now a simpler rear end, where the torsion setting is handled via a single setup screw, replacing the damper and springs system used on the previous version. The rear end features a narrower track, for a better grip, while the typical 60’s short wheelbase is retained. Of course, Classique 2 is fully compatible to the existing Fenix Classique bodies. The Classique 2 and F1-70 are meant to be the backbone for the Fenix Collectors Series, which us planned to be released later this year. Source: Fenix Racing [fenix-racing.com] FacebookTwitterThe post Fenix Racing Classique 2 F1 chassis appeared first on Red RC. |
You are subscribed to email updates from Red RC. To stop receiving these emails, you may unsubscribe now. | Email delivery powered by Google |
Google, 1600 Amphitheatre Parkway, Mountain View, CA 94043, United States |
Loading...
Loading...