Red RC - RC Car News

Traxxas introduce new E-Revo VXL monster truck

Posted: 07 Feb 2018 08:55 AM PST

Traxxas’ popular E-Revo monster truck has received a massive overhaul with the 2018 edition being considered faster and stronger than ever before. The truck builds on an innovative low centre of gravity chassis with major components such as batteries being placed as low and close to the centreline as possible. Key areas were targeted for added strength and rigidity, such as the battery compartments and bulkhead mounts while new front and rear top braces resist flex and further protect the inboard shocks. Upgraded front and rear differentials with massively larger ring and pinion gears use over twice as much steel for extreme durability while heavy weight oil gives them the performance feel of limited slip differentials. The steel drive cups fit over 8mm hardened steel output shafts which ride on oversized sealed bearings.

The torque-biased centre drive unit features an integrated cush drive to protect the driveline against impacts and it is precision-tuned to allow instant wheels-up punches pff the line and seamless, virtually invisible operation at speed. The advanced in-board suspension allows for high suspension travel while offering a low centre of gravity. The truck is powered by the VXL-6s power system with the speed controller being telemetry-ready and the massive 2200kV brushless motor allows for top speeds of over 90km/h. The package is rounded off by new multi-terrain tyres on black 6-spoke rims and a new body shell that is available in two designs. The truck is set for a release in late February.

Specifications:
– Length: 585mm
– Width: 465mm
– Ground Clearance: 73mm
– Weight: 5.08kg
– Height: 221mm
– Wheelbase: 380mm
– Wheels: 97mm
– Speed Control: Velineon VXL-6s
– Motor (electric): 2200kV
– Transmission: Single speed
– Gear Pitch: 1.0 Metric pitch (Mod-1)
– Final Drive Ratio: 20.49:1
– Differential Type: Sealed, 4-gear
– Center Differential Type: Sealed, 4-gear (20M weight oil)
– Chassis Structure / Material: Composite tub
– Brake Type: Electronic
– Drive System: Shaft driven 4WD
– Steering: Bellcrank
– Radio System: TQi 2-channel transmitter with 6533 TSM receiver
– Servo: Dual 2075
– Top Speed (optional gearing): 70+ mph
– Battery Compartment: 156mm x 50mm x 29mm

Source: Traxxas [traxxas.com]

Speedzone 6000mAh 4S LiHV battery pack

Posted: 07 Feb 2018 07:46 AM PST

Coming from Speedzone is their new 6000mAh 4S LiHV battery pack for 1/8th scale applications. Made from high-performance 100C cells the back measures 138.5×46.5x49mm and it weighs in at 556g. The hardcase battery comes pre-wired with an industry-standard balance and T-plug power connector and it is available now.

Source: Speedzone [speedzoneusa.com]

Adam Drake wins at Thunder Alley club race

Posted: 07 Feb 2018 06:19 AM PST

Thunder Alley of Beaumont, California held a club race this past weekend that attracted some of the state’s fastest off-road racers. In the Expert Nitro Buggy A-main it was Mugen’s Adam Drake with the win in the 20-minute encounter from new Serpent signing, Cody King who ended the race some 4 seconds short of Adam. In 3rd and a lap down Mugen’s Anthony Westergaard completed the top 3 podium result.

Image: Adam Drake

Capricorn C803 short rear driveshafts

Posted: 07 Feb 2018 02:47 AM PST

Made for the C803 on-road car are Capricorn’s new shorter rear driveshafts. 1.5mm shorter in length than the standard items, the driveshafts allow to run the car with a more narrow rear track width which can be beneficial on tight and technical tracks or even necessary when running large off-set wheels.

Source: Capricorn [capricornrc.com]

1up Racing on-road pit board with Quikcheck

Posted: 07 Feb 2018 01:38 AM PST

1up Racing have introduced their all-new on-road pit board that offers an oversized 300mm x 450mm matte black work area with enough space to mark 1/10th touring car bodies for accurate cutting. Each pit board includes a QuikChek decal for quick reference of wheelbase, popular bearing and screw sizes, and a 300mm ruler. A gloss black band surrounds the work area completing the clean look. The QuikChek is available with Blue, Red, Orange, Pink, Green or Gray accents to match any pit space and the QuikCheck decal can also be personalised with a custom name.

Source: 1up Racing [1upracing.com]

Ishioka & Knapp sweep 2018 Snowbird

Posted: 07 Feb 2018 01:22 AM PST

Last weekend’s 2018 Snowbird Nationals saw 600 entries spread across many electric on-road classes and in the hotly contested Formula category it was Japan’s Hayato Ishioka (CRC). However, CRC teammates Andrew Knapp and Jeff Dayger were hot on his heels but after the 5-minute single A-main it was still Hayato who would hold the upper hand with Andrew ending the race only 0.3 seconds short of the Japanese ace. In third and only a tenth of a second short of Andrew, Michael Hanulec would end the race on the 3 spot. Over in 1/12th 17.5T it was Andrew Knapp who TQ’d all four qualifiers and went on to win the main. Robbie Dodge would come in 2nd, 0.8 seconds down on Andrew while Joe Trandell snatched the final podium spot.

Source: CRC [teamcrc.com]

RC Speed Secrets YZ-2 DTM titanium screw kits

Posted: 07 Feb 2018 12:36 AM PST

Coming from RC Speed Secrets and made for the Yokomo YZ-2 DTM 2WD buggy are two new titanium screw kits. Available as 70-pieces upper and 26-pieces lower set, the fasteners are made or Grade 5 quality titanium and they feature deep sockets for easier wrenching and less stress on both the screw heads and tool tips. The sets are available in a rainbow/oil slick finish or in a stealth black finish to make them stand out.

Source: RC Speed Secrets [rcspeedsecrets.com]
http://rcspeedsecrets.com/rcss-yokomo-yz-2-dtm-upper-titanium-screw-kit-tapered-deep-socket/

Yeah Racing YD2S black aluminium gearbox

Posted: 07 Feb 2018 12:22 AM PST

Yeah Racing have introduced their new quick release aluminium gearbox for the Yokomo YD2S drift car. The transmission housing compromises of two sturdy bulkheads and small differential clamps that allow to extract the rear differential after undoing only four screws for swift and easy maintenance tasks and setup changes. The gearbox is machined from high-quality aluminium, it comes black anodised, with machined edge details and laser-etched markings.

Source: Yeah Racing [yeahracing.com]

Vigor RC T4 RF+2 ARS suspension mounts

Posted: 06 Feb 2018 11:37 PM PST

Coming from Vigor RC and made for the Xray T4 2018 and 2017 cars is a RF+2mm ARS suspension mount. The updated geometry makes for parallel suspension pins, rather than having them angled as it is standard, which results in improved rear end grip and smoother suspension operation when using the ARS system. In addition the pivot ball mount was lowered by 1mm for increased toe angle adjustability.

Source: Vigor RC [vigorrc.com]

Avid EB410 carbon fibre battery brace

Posted: 06 Feb 2018 11:24 PM PST

Coming from Avid is a carbon fibre battery brace for the Tekno RC Eb410 buggy. The part is made from 100 percent carbon fibre and designed for easy balance plug access no matter how it is installed. The brace works with stock or aftermarket hardware and is available separately or including a black aluminium thumbwheel.

Source: Avid [avidrc.com]