Red RC - RC Car News

Reedy Zappers SG2 competition LiHV battery packs

Posted: 08 Jan 2019 08:54 AM PST

Team Associated have introduced the all-new Reedy Zappers SG2 LiHV batteries. The Zappers SG2 batteries continue to utilise silicon-graphene construction but with an emphasis on reducing internal resistance and increasing cycle life. The batteries feature a 7.6 nominal voltage, meaning that with a suitable charger, the battery can be safely charged to 4.35V/cell. However, even when the typical 8.40V (4.2V/cell) charging limit is enforced, Zappers SG2 still offers a significant advantage thanks to a flatter discharge curve, which results in more voltage deeper into the race. Zappers SG2 batteries are available in low-profile (LP) stick and shorty versions as well as a 1S version designed for 1/12th and other classes that require 1S batteries. A high quality, durable hard case helps prevent damage while embedded socket connectors keep power-robbing resistance to a minimum. Male ESC connectors are included.

Source: Team Associated [teamassociated.com]

The post Reedy Zappers SG2 competition LiHV battery packs appeared first on Red RC - RC Car News.

Alberico & Keel win at Salt City Challenge

Posted: 08 Jan 2019 08:41 AM PST

The Salt City Challenge was held at Hi-Performance Hobbies in Hutchinson, Kansas last weekend. The race drew 160 entries and in 2WD Mod Buggy it was David Alberico with the TQ and overall win after the triple A-mains. Tyler Keel would come in 2nd, leaving behind Charles Day in 2nd. Over in the 4WD Mod Buggy class Tyler Keel made a clean sweep, taking the TQ and win as Todd Sieler and David Alberico came in 2nd and 3rd respectively.

Source: Kyosho [kyoshoamerica.com]

The post Alberico & Keel win at Salt City Challenge appeared first on Red RC - RC Car News.

Fantom introduce new super low profile LiPo packs

Posted: 08 Jan 2019 07:13 AM PST

Coming from Fantom Racing are two new super low profile Lithium battery packs. Available as 5400mAh Pro HV LiHV and 5200mAh MaxV-Spec LiPo variant, both packs sport a standard 2-cell footprint and a height of only 19.5mm for a lower centre of gravity and a lower weight. Proprietary Silicon Graphene chemistry stabilises the cells and increases cycle life and efficiency while offering the ultimate combination of voltage, high capacity, and low resistance. The Pro HV pack weighs in at only 234g while the 5200mAh MaxV-Spec packs weighs 240g. Both are housed in protective hardcases and they utilise 5mm bullet-type connectors.

Source: Fantom Racing [fantomracing.com]

The post Fantom introduce new super low profile LiPo packs appeared first on Red RC - RC Car News.

R1 Wurks 5500mAh 7.4V Super Slim LiPo pack

Posted: 08 Jan 2019 07:01 AM PST

R1 Wurks have announce the addition of a 5500mAh 7.4V Super Slim pack to their Enhanced Graphene line up of batteries. This all-new battery boasts a pack height of only 19mm and weighs in at 232g, about 3.5mm lower and 58g lighter than the company’s 6000 LCG pack.

Source: R1 Wurks [r1wurks.com]

The post R1 Wurks 5500mAh 7.4V Super Slim LiPo pack appeared first on Red RC - RC Car News.

Tamiya introduce new T3-01 option parts

Posted: 08 Jan 2019 05:39 AM PST

Coming soon from Tamiya are new option parts for the popular T3-01 Dancing Rider trike. First up is an aluminium servo arm set that replaces the standard item for a more durable, precise and rigid one. The kit includes a large hardware set. Also new is a FRP support arm kit that replaces the standard moulded plastic item. Using the fibreglass part will provide greater durability and rigidity.

Source: Tamiya [tamiya.com]

The post Tamiya introduce new T3-01 option parts appeared first on Red RC - RC Car News.

Xray Xmas Race – Report

Posted: 08 Jan 2019 04:52 AM PST

The Xray Xmas Race was held just before new year at the Hudy Racing Arena in Trencin, Slovakia. The schedule saw open practice on Friday with Saturday being race day being Saturday. The qualies started with Martin Bayer on the top in both the 2WD and 4WD Buggy classes. In 2WD Adam Izsay put also his best run in the Q1, as Martin did. Max Götzl was trying some changes on his car in the Q2, but it took him until Q3 to extract the maximum out of it, just missing the 2nd place by 0.5s. So in the end it was Adam sitting on the 2 spot on the grid behind Martin and in front of Max. In 4WD it was again Martin 1st followed by Adam in 2nd and Max in 3rd.

The finals went great to Martin’s favour, as he took the overall wins in 2WD and 4WD right after the opening two A-mains. In 4WD the 2nd place was decided after A2, as Adam took 2nd in A1 and also in A2. Max would try to win the final main to take the 2nd, but he was missing too much speed in the 4WD class and finished 3rd overall behind Adam and Martin, making it an all-Xray podium.

In 2WD the fight for the runner-up spot was on between Max and Adam and ultimately it was Max who would hold the upper hand, leaving behind Adam in 3rd as Martin took the win for another Xray 1-2-3.

In the Stadium Truck class Max Götzl was flying, taking the TQ and win from Fillippo Domanin and Kuba Krus (all Xray).

Over in the Touring Stock class Jakub Rozycki was the man to beat as he took the overall TQ ahead of Zdenko Kunak and Martin Hudy. In finals, each final had different winner but eventually the top 3 remained the same as Jakub Rozycki lead an Xray 1-2-3 with Zdenko Kunak coming in 2nd and Martin Hudy finishing in 3rd.

In 1/10 Formula, Balint Rajki was the man of the show as he took the overall TQ and then went on to win all three A-main legs. Mark Valent and Krystian Kopacki came in 2nd and 3rd respectively.

In 1/12 Branislav Panak took a pretty easy TQ and then cruised to the overall win from Zsolt Kalnay and Marcel Dostal, all running Xray cars.

In 1/10 Pan Car, Vladimir Viskup took a close TQ ahead of Rudo Kadlecik. The same duo fought closely for the win but in the end Vladimir took the overall victory from Rudo in 2nd. Miroslav Hagas rounded out the all-Xray top 3.

In 1/12 GT, Xray pilot Branislav Panak took his second TQ and win of the day as Mateusz Tutaj (Xray) came in 2nd.

Source: Xray [teamxray.com]

The post Xray Xmas Race – Report appeared first on Red RC - RC Car News.

Marco Baruffolo FX-powered for 2019

Posted: 08 Jan 2019 04:03 AM PST

FX Engines have announced the signing of top Italian off-road pilot, Marco Baruffolo to use their engines in 2019. The Xray factory pilot will attend all major European races including the EFRA Euros, the Montpellier GP, and the DXR Dirt Kings race as well as the Italian Nationals and other select events. Marco says:

I’m very proud to be in FX family. I tested the engine and it is very smooth and with a great power. I hope to have a successful year together! Thanks to FX for this opportunity.

Source: FX Engines [fx-engines.com]

The post Marco Baruffolo FX-powered for 2019 appeared first on Red RC - RC Car News.

RC Cars Cavalieri 8ight-X arm insert set

Posted: 08 Jan 2019 03:12 AM PST

RC Cars Cavalieri from Germany have announced the release of a carbon fibre arm insert set for the TLR 8ight-X buggy. The kit includes four precision-machined 1mm carbon fibre inserts for the front and rear lower arms that will add rigidity when running in high-bite or high-temperature conditions. Also includes is the needed mounting hardware, making the set a direct fit.

Source: RC Cars Cavalieri [carbon-cavalieri.de]

The post RC Cars Cavalieri 8ight-X arm insert set appeared first on Red RC - RC Car News.

Viktor Wilck teams up with Infinity

Posted: 08 Jan 2019 03:04 AM PST

Creation Model have announced the signing of Swedish electric on-road ace, Viktor Wilck to their factory team. The former Serpent driver, who claimed back-to-back podium finishes at the most recent Electric Touring Car World Championships in South Africa, joins former team-mate Marc Rheinard, Akio Sobue and Yannic Prumper to further strengthen the Japanese manufacturer’s Touring Car programme. A multiple ETS race winner, Wilck will make his race debut with the team at the second round of the championship in Daun, Germany, next month as they strives to add the Euro Touring Series title to their IF14’s list of achievements. Commenting on his move to the Reedy Race and TITC winning manufacturer, Wilck said:

I am very pleased to be joining the Infinity team. I have seen the dedication and professionalism going into the team and products. I know Infinity will keep improving and give me the best package for the upcoming season. I would like to thank Infinity and especially Kenji Taira for this opportunity and I am looking forward to the next years together.

Source: Creation Model [creationmodel.net]

The post Viktor Wilck teams up with Infinity appeared first on Red RC - RC Car News.

SWorkz S35-3 Worlds rear end conversion kit

Posted: 08 Jan 2019 01:38 AM PST

SWorkz have introduced the Jörn Neumann Edition Worlds rear end conversion kit for the S35-3 1/8th off-road buggy. The set includes new rear lower arms, rear uprights, wheel hex adapters and several other parts that help to increase the buggy’s rotation in tight and twisty tracks, such as the 2018 IFMAR Worlds track in Perth, Western Australia. Using the parts will free-up the rear end while adding steering and while the set is the go-to solution on smaller, tighter tracks, it is better to stay with the usual setup on normal tracks, according to SWorkz’s Jörn Neumann. The set is a direct fit with everything included for the conversion and it is available now.

Source: MW RC Cars [mwrccars.at]

The post SWorkz S35-3 Worlds rear end conversion kit appeared first on Red RC - RC Car News.