Loading...
Red RC - RC Car News |
| Samix TRX-4 aluminium differential case Posted: 07 Feb 2019 11:06 AM PST Coming from Samix and made for the Traxxas TRX-4 trail truck is an aluminium differential case. Machined from high-quality material the case, that is usable in the front and rear axles, offers greatly improved stability and durability compared to the standard part and it available in three different colours. Source: Samix [rcsamix.com] The post Samix TRX-4 aluminium differential case appeared first on Red RC - RC Car News. |
| Posted: 07 Feb 2019 07:31 AM PST Coming from Corner Speed RC are three new lubricants for various applications in RC racing. First up is the Max-Rev high speed bearing oil, a low viscosity lubricant. It has been carefully formulated and tested to maximise the efficiency of the lube in the toughest of conditions. It contents a special additive that helps the lube to working consistency under extremely high RPM and it comes in a 10ml needle tip bottle that make it easy to apply on any small bearings and parts. Next up is the Maxi-Free CV joint lube, a deeply penetrating teflon lubricant that works for on-road and off-road applications. The wet lubricant dries out on the parts, leaving a super hard and extremely durable film that does not attract dirt and keeps away carpet fluff and tyre rubber. The fluid comes in an easy to use fine tip bottle. Last but not least comes the Steel 2 Plastic dry lubricant for all metal-to-plastic and plastic-to-plastic connections. It prevents dirt and grime to build up inside plastic joints for long lifespan while helping them working consistently in different conditions. The lube is great for all on-road and off-road applications. Source: Corner Speed RC [facebook.com] The post Corner Speed RC lubricants appeared first on Red RC - RC Car News. |
| ORCA OE1 1/10th brushless speed controller Posted: 07 Feb 2019 06:43 AM PST Available now from ORCA is their all-new OE1 brushless speed controller for 1/10th competition applications. Utilising a machined alloy case with heatsink design the ESC is 760A peak current rates, allowing to use it with down to 4.5T modified motors. Other features include an adjustable heavy-duty 6V/7.2V and 5A BEC system, 3S LiPo compatibility, and an easy-to-replace receiver wire. The controller is adjustable using Orca’s options programming card and it comes including all-black power wires and an optional cooling fan. Specifications: Source: ORCA [orcarc.com] The post ORCA OE1 1/10th brushless speed controller appeared first on Red RC - RC Car News. |
| Hudy 1/8th off-road diff & shock tray Posted: 07 Feb 2019 06:26 AM PST Hudy is busy adding more specialised trays to their growing range with the latest being a dedicated variant for 1/8th scale diffs and shock absorbers. The machined alloy tray is made of high-quality 7075 material and it offers four individually marked compartments as well as a detachable shock stand. The tray allows for easier shock and diff building and maintenance as it prevents parts from becoming mixed while also offering a sturdy base to rest the shocks in during refilling. Source: Xray [teamxray.com] The post Hudy 1/8th off-road diff & shock tray appeared first on Red RC - RC Car News. |
| Zen Racing P12 Evo carbon fibre chassis set Posted: 07 Feb 2019 03:03 AM PST Zen Racing have introduced a carbon fibre chassis set for the Roche P12 Evo 1/12th scale pan car kit. The chassis shape has been changed slightly at the front in order to improve strength while adjusted cutouts give the servo saver a little more room. Included with the main chassis comes a suitable lower rear pod plate. Source: Zen Racing [zen-racing.co.uk] The post Zen Racing P12 Evo carbon fibre chassis set appeared first on Red RC - RC Car News. |
| Xray Racing Series Italy Rd1 – Report Posted: 07 Feb 2019 02:14 AM PST The opening round of the Xray Racing Series Italy, a 3-race indoor tour, was held recently at the SRC track with 70 drivers in attendance. In the premier Touring Modified class, Menicucci lead the race from the qualifying rounds with Mazzeo, Baruffolo, Romagnoli, Piersante and Mancini fighting for the remaining podium places. In the end it was Menicucci with the win from Baruffolo and Romagnoli (all Xray). The Touring Pro Stock class saw some hard battle with the young Xray team drivers. Romagnoli, Di Febo, Ferrentino and Domanin had a fantastic battle until the very last final and in the end it was Di Febo with the win followed by Romagnoli and Domanin (all Xray). In Touring Stock, Andrea Bonora was on point all weekend, followed by Randi and Berardinucci. In the GT category, Capasso, Marchesani and Dalia De Ritis made up the all-Xray top 3. The Formula class was won by Xray driver Spedaliere in front of Pipolo as Serpent pilot Tacconelli completed the top 3. Finally in the very fast 1/12th scale class Domanin took home the win from Lazzari and Beri, all piloting Xray cars. Source: Xray [teamxray.com] The post Xray Racing Series Italy Rd1 – Report appeared first on Red RC - RC Car News. |
| HiroFactory F104/F103 central lock left wheel hub Posted: 07 Feb 2019 01:51 AM PST HiroFactory have introduced a new central lock left wheel hub for Tamiya F104/F103 formula cars. Featuring a clamping design using a central locking nut the hub offers improved reliability compared to standard locking-type hubs while being gentle on the axle shaft at the same time. Usable with all 6.35mm or 1/4” axles and on F104/F103-style cars the hub comes machined from high-quality 7075-T6 aluminium and it is black anodised for wear and looks. Source: HiroFactory [hirofactory.jp] The post HiroFactory F104/F103 central lock left wheel hub appeared first on Red RC - RC Car News. |
| Rebellion-RC T4 low profile conversion kit Posted: 07 Feb 2019 01:12 AM PST Coming from RC-Carbonstore’s Rebellion-RC brand is a low profile conversion kit for the Xray T4 touring car. The set allows for a somewhat radical shock conversion that places the dampers 5mm lower compared to the standard setting for an overall lower centre of gravity. In addition the updated geometry optimises overall damping for higher corner speeds, less traction rolling in high-grip conditions and a more linear shock action. The set, that fits the 2017 to 2019 variants of the T4, contains all needed parts, including shock towers, lower arm extensions and machined original T4 arms. As usual with Rebellion-RC’s carbon fibre optionals, the set is available in twelve different carbon fibre weave colours and all parts, as well as the machined arms, are also available separately for spares or repair. Source: RC-Carbonstore [rc-carbonstore.com] The post Rebellion-RC T4 low profile conversion kit appeared first on Red RC - RC Car News. |
| KO Propo RSx3-one10 Flection Type-T servo Posted: 07 Feb 2019 12:16 AM PST KO Propo have introduced their new RSx3-one10 Type-T servo, specially developed for the use with Tamiya brushless speed controllers. The steering servo builds on the proven RSx3-one10 series, however a specially developed coreless motor makes for lower current consumption, ideal for speed controller with less powerful BEC systems such as Tamiya’s brushless ESC that features a 1.5A BEC system. The servo is aimed towards the use in Tamiya racing series where the Tamiya speedo is mandatory but it can be used with basically every other electronic speed controller. In addition the servo features five programmed settings, for high-grip asphalt, low-grip asphalt, low-grip carpet, Tamiya World Championship blue carpet and the Tamyia Kakegawa track, all of which are accessible using KO Propo’s HCS programming interface. To further make the servo stand out it features light blue case details and a black high-flex receiver wire. Specifications: Source: KO Propo [kopropo.co.jp] The post KO Propo RSx3-one10 Flection Type-T servo appeared first on Red RC - RC Car News. |
| Muchmore Impact competition LiPo battery packs Posted: 06 Feb 2019 11:59 PM PST Muchmore have introduced three new standard size Impact Silicon Graphene series LiPo and LiHV battery packs. First up is the 8200mAh Impact Max-Punch FD4 7.4V LiPo pack that measures 138×46.5×24.8mm and weighs in at 323g. The 130C cells provide lots of punch for non-booted stock racing classes. Next up is the 6000mAh Impact LCG Max-Punch FD4 7.4V pack, again made of high-performance 130C cells but at 22.3mm of height it weighs in at 285g, making for an overall lower centre of gravity. The battery is aimed at blinky and boosted stock racing classes. Both packs features a flat voltage discharge curve and a super low internal resistance. Last but not least comes the Impact LCG HV FD4 LiHV 7.6V battery pack. Made of high-quality 130C cells and featuring a flat voltage discharge curve the 22.3mm tall battery weighs in at 283g and it can be charged to up to 8.7V, making it ideal for outlaw stock and modified racing. Source: Muchmore [muchmore.net] The post Muchmore Impact competition LiPo battery packs appeared first on Red RC - RC Car News. |
| You are subscribed to email updates from Red RC - All feeds. To stop receiving these emails, you may unsubscribe now. | Email delivery powered by Google |
| Google, 1600 Amphitheatre Parkway, Mountain View, CA 94043, United States | |
Loading...
Loading...
