Loading...
Red RC - RC Car News |
Tamiya T3-01 aluminium front fork stabiliser Posted: 04 Apr 2019 08:15 AM PDT Tamiya have announced the soon release of an aluminium front fork stabiliser set for the T3-01 kits. The set includes a machined and blue anodised aluminium brace that reinforces the front fork for improved performance and stability while the included 6.5g and 3.6g brass weights help to fine-tune steering characteristics according to the surface and track conditions. The set will become available in May. Source: Tamiya [tamiya.com] The post Tamiya T3-01 aluminium front fork stabiliser appeared first on Red RC - RC Car News. |
Dash RC R-Tune V2 modified brushless motor Posted: 04 Apr 2019 07:38 AM PDT Dash RC have introduced their new R-Tune V2 modified brushless motor. Designed to be lighter and faster than the previous model, the V2 variant features a high airflow arrow design with large openings in the machined aluminium can to guarantee maximum cooling efficiency, a lower weight and minimised power fading in high ambient temperatures. The redesigned stator helps to achieve a much lower internal resistance while offering increased torque which enhances the overall performance. The motor comes equipped with Japan-grade bearings for maximum efficiency and it is available in 3.5T to 8.5T specification for on-road and off-road applications. Source: Dash RC [dash-rc.com] The post Dash RC R-Tune V2 modified brushless motor appeared first on Red RC - RC Car News. |
Tamiya M-08 Concept M-chassis kit – Coming soon Posted: 04 Apr 2019 04:00 AM PDT Tamiya have released a first image of their forthcoming new M-08 Concept 1/10th 2WD M-chassis on-road kit. The latest incarnation of the long-running and very popular M-class touring car will feature a rear-mid motor layout and a modular design that allows easier wheelbase changes with 210mm, 225mm and 239mm setups being accessible. The kit comes equipped with a TA06/M-07 Concept-type gear differential, long-type suspension arms, 0 degree front suspension mounts, 2 degrees C-hubs, CVA shocks, universal driveshafts and high-torque servo saver being standard equipment. Also included comes a full ball bearing set. Many of the existing M-07 optionals are also usable with the M-08 and more information about the kit should become available in time for the release. Source: Tamiya [tamiya.com] The post Tamiya M-08 Concept M-chassis kit – Coming soon appeared first on Red RC - RC Car News. |
Posted: 04 Apr 2019 02:03 AM PDT The Euro Contest X, the 10th edition of the popular 1/8th off-road race, will be hosted by the OSPY Team club from the 21st to 23rd of June in Gussago in Northern Italy. The 2019 race will see Nitro Pro, Open and E-Buggy classes with last year’s event drawing 300 entries. Full information, sign-up and more can be found on the official event website here. The post Euro Contest X – Announcement appeared first on Red RC - RC Car News. |
175RC.com B6.1 silver carbon fibre motor plate Posted: 04 Apr 2019 01:54 AM PDT 175RC.com have added a silver carbon motor plate to their range of Team Associated B6.1 option parts. The plate is an optional B6.1 upgrade cut from high quality 3mm silver weave carbon to provide a killer factory driver look, with the lightweight functionality of a carbon fibre part. The item is a direct fit for both the B6.1 and B6.1D. Source: 175RC.com [175rc.com] The post 175RC.com B6.1 silver carbon fibre motor plate appeared first on Red RC - RC Car News. |
Hudy Air Vac 1/8th off-road vacuum pump Posted: 04 Apr 2019 01:35 AM PDT Hudy have introduced the latest addition to their range of Air Vac vacuum pumps in the form of a dedicated 1/8th off-road variant. Powered by a 2S LiPo battery or 12V power supply the pump helps to remove unwanted air bubbled from shock absorbers or gear differentials, ensuring more evenly function. The tool consists of a CNC-machined 7075-T6 aluminium base and a clear upper cylinder and it can also be used to soak tyre traction compounds in to 1/12th and 1/10th scale foam tyres which will lead to better and longer effect. The pump comes including connection wires and a protective hardcase for convenient storage and transportation. Source: Hudy [hudy.net] The post Hudy Air Vac 1/8th off-road vacuum pump appeared first on Red RC - RC Car News. |
Schelle RC8B3.1 2-row carbon rear tower Posted: 04 Apr 2019 12:40 AM PDT Schelle Racing Innovations’ 2-row carbon fibre rear shock tower was developed for both the electric and nitro RC8B3.1 series buggy and offers a a second upper row of mount holes to move the entire shock when running a low roll centre on the rear hubs. Having the hinge pin close to the rear axle, commonly called “hubs down” will be shifting the shock along with the axle height on the rear hinge pin, giving the advantage of more up-travel. In bumpy conditions on hard cornering, the additional travel helps the tyres to navigate the surface without bottoming the shock and upsetting the chassis. The lower row of holes matches the kit geometry and is intended for running in the HRC axle height on the rear hub. The tower is cut from 4mm material, it has a no-pockets design to prevent delimitation and large hole spacing increases durability. The tower fits RC8B3.1, 3.1e, and older RC8B3 versions. Source: Schelle Racing Innovations [schelleracing.com] The post Schelle RC8B3.1 2-row carbon rear tower appeared first on Red RC - RC Car News. |
Xray X1 independent rear wing mount set Posted: 04 Apr 2019 12:31 AM PDT Coming from Xray and made for the X1 formula car kit is the independent rear wing mount set. The set allows to install the rear wing fully independently from the rear pod plate ensuring the wing stays in the same position as the chassis despite the rear power pod movement which helps to improve the car’s stability while increasing rear traction. The rear wing mount plate features holes for wing mounting in exactly the same positions as the standard wing mount, ensuring the aerodynamics remain the same when switching between the standard and independent mount. The set can be used either with the rear gear differential or ball differential and the wing mount has multiple positions which allow higher or lower mounting of the rear wing to adapt to traction, conditions, and racing surfaces. Source: Xray [teamxray.com] The post Xray X1 independent rear wing mount set appeared first on Red RC - RC Car News. |
Kyosho MP10 brass C-hub inserts – Coming soon Posted: 04 Apr 2019 12:03 AM PDT Yuichi Kanai is busy teasing more forthcoming Inferno MP10 optionals – this time he announces the soon release of brass C-hub inserts for Kyosho’s latest 1/8th off-road platform. The parts will add to the upcoming rear hub brass inserts that help to up unsprung masses which will translate to improved traction on low grip or bumpy surfaces. The front C-hub inserts will be a direct fit for at least the plastic C-hubs and we bring you more information on all new parts as soon as they surface. Source: Kyosho [kyosho.com] The post Kyosho MP10 brass C-hub inserts – Coming soon appeared first on Red RC - RC Car News. |
1up Racing release new servo mounting screw sets Posted: 03 Apr 2019 11:52 PM PDT 1up Racing have announced four new additions to their servo mounting screw lineup in the form of 6mm, 8mm, 10mm and 12mm thread lengths. The 6mm length offers the same 4.2mm wide neck as the original 4mm length screws while the three longest lengths offer a 3mm neck for use with anti-vibration mounting hardware on nitro cars. The screws are precision machined from ultra-strong U.S. 7075-T6 alloy and finished with deep black anodising and a mirror-like chamfer. Source: 1up Racing [1upracing.com] The post 1up Racing release new servo mounting screw sets appeared first on Red RC - RC Car News. |
You are subscribed to email updates from Red RC - All feeds. To stop receiving these emails, you may unsubscribe now. | Email delivery powered by Google |
Google, 1600 Amphitheatre Parkway, Mountain View, CA 94043, United States |
Loading...
Loading...