Yanko Design - Form Beyond Function

Clean Teeth, Clean World!

Posted: 28 Oct 2017 06:34 AM PDT

Picture this. Count the number of products you own that use batteries. Multiply it by 7.3 billion. That’s roughly the number of battery-powered products we as a species use, and eventually discard. Only 1% of discarded batteries actually get recycled, so look at your electric toothbrush and ask yourself. Is a polluted earth an appropriate price to pay for clean teeth? There’s only one answer here really, and it’s a no! The Be. toothbrush aims at providing the experience of an electric toothbrush, but without the electric bit. Devoid of motors, and batteries, and circuit boards, the Be. is a pretty ingeniously made brush that uses common sense, rather than a lithium-ion battery.

Taking cues from an unlikely yet brilliant place, the Be. uses a wind-up mechanism we’ve seen being used for long in toys and timers. It simply converts one form of energy into another, allowing you to merely rotate a dial on its base that then winds up a mechanism within the toothbrush body, causing the head to vibrate as would any electric toothbrush.

The Be.’s creation was sparked by a need to solve the earth’s pollution crisis. Designed as a completely analog piece of highly effective dental equipment, the Be. rivals the best electric toothbrushes. Just two twists on its base are enough to power you through an entire brushing cycle, with the same (if not better) effectiveness of an electric toothbrush. The Be.’s body and bristles are a 100% recyclable and biodegradable too, so your teeth AND your planet stay clean!

The Be.’s battery-free approach isn’t just eco-friendly, it’s you-friendly too! It prevents the need to charge your toothbrush, or to replace batteries periodically. It also means the Be. can be easily carried on flights with zero hassle A snap-on case makes carrying the Be. around an absolute dream. Plus, with each Be. you get a one year’s supply of interchangeable and completely recyclable bristle-heads… That’s just dental! I mean mental!

Designer: Patrick Triato

Click here to Buy Now: $49.00 $129.00

Battery & Electric-Free – Brushing with Be. means no cables, no batteries, and no problems. Transform your daily brushing routine into a simple 3-step process: put toothpaste on the bristles, give the dial two full twists, hit the power button and let Be. work its magic.

Sustainable – Practice zero waste at home with Be.’s 100% biodegradable brush heads and recyclable build. The first toothbrush that gives you all the benefits of clean teeth, at no expense to the earth.

Smart Technology – Be.’s smart sensor operates at the ADA recommended precise tartar-fighting pressure of 120g, training you to brush thoroughly but consciously. With 80,000 charcoal infused brushstrokes at the perfect pressure, you’re off brushing for a diamond clean smile.

Travel-Friendly – Whether you’re traveling for business, backpacking outdoors or just bringing your toothbrush to work, Be. keeps up with your on-the-go lifestyle. The snap-on case creates an easy to carry cylinder and fits 1 extra brush refill for extended travel.

Simplify Your Routine – Be. keeps your daily brushing routine easy, similar to your manual brush.

If electric toothbrushes are so good, why do the majority of people still use manual toothbrushes? Well, manual is easy, and as a species we like easy things. If you haven’t made the switch to electric yet, don’t! We have good news. With no batteries, PCB boards, soldering, or wires, Be. is still a manual toothbrush for all intents and purposes. Two twists of the dial and no charging needed has you brushing like you would with your manual toothbrush, but with 10x the cleaning power.

Improve your Dental Health – A deeper clean that changes your tartar fighting game.

Most dentists will suggest using an electric toothbrush to get that diamond clean smile. Why? It’s proven they do a better job at getting debris out of your teeth, avoiding plaque, cavities and tooth decay. With over 80,000 brushstrokes, Be. has more power than your average electric toothbrush, cleaning deeper and whitening faster so you never have to worry about compromising your oral hygiene for sustainability. As the ultimate hybrid, you get the best of both worlds by brushing with Be.

Click here to Buy Now: $49.00 $129.00

YD gets the Amman Design Week 2017 Experience!

Posted: 27 Oct 2017 04:52 PM PDT

How do you get an entire city, no, an entire country to talk about design? To learn how it evolved from art, culture, and an innate need to solve problems? You host a week-long event open to all, housing some of the greatest design talent from 11 countries, talking about design as not just a profession, but also as a way of life.

With the theme “Design Moves Life Moves Design”, Amman witnessed its second Design Week in two years, seeing a footfall of more than 35,000 people as designers from countries like Bahrain, Morocco, Palestine, UAE, Saudi Arabia, Lebanon, Netherlands, Norway, Italy and USA gathered to display their works to show how life can impact a designer, and how their designs in turn can impact life!

This year’s Amman Design Week was in every sense bigger, but more nuclear. Rather than having events at three different locations across the city, the festival saw everything happen in the town’s creative hub, AKA the Hangar and the Ras Al Ein Gallery. With just a 40ft road separating the two venues, patrons could visit all the exhibits in a single day, spending much more time at the event. With incredible design works within the Hangar, along with a Student Exhibition, to a Crafts District filled with indigenous crafts and handicrafts on display and for sale, as well as a Cultural Plaza for talks on design, the Amman Design Week left no stone unturned.

We first look at the Hangar. An iconic building in its own right, the Hangar used to be Amman’s Power and Electricity Hub. After the city started expanding, the Hangar was decommissioned and shut down. It now houses a different kind of spark (if you know what I mean!), as designers gather to showcase their creative abilities and techniques while also conveying a variety of messages. With more exhibits than the last time, the Hangar’s curator, Ahmad Humeid had to be extremely selective, adhering to the theme but also showcasing diversity. With massive installations on the outside to attract one’s attention, and a wide selection of design work on the inside, the Hangar provided what can only be described as an accurate image of how talented the designers in the middle east are, and how this talent can be harnessed to truly uplift lives in and around the area.

Amal Ayoub’s installation shows how the Dead Sea is losing its salt over time with commercial abuse. The installation fills up with water and the salt crystals gradually dissolve.

MEAN (Middle East Architecture Network) showed a heart-rending picture of the earth drying up and cracking with their stone and distressed metal installation.

A miniature of Ammar Khammash’s Masonry Bridge shows how the bridge is to be built with its scaffolding that will gradually disappear, leaving just one single bridge in its place.

Rawan Kakish and Hamad Al Sultan’s “A Path of Synergy” literally lights up the outside space of the Hangar with these laser cut butterfly wings that light up and flutter as you stand underneath!

Uraiqat Architect’s X3 project features independently moving mirrors that break and then rejoin your reflection, in an attempt to make you introspect. Easily a crowd favorite!

Bricklab’s Dividied by Congregation paints three soundscapes of a city. One consumed by the chaos of the city, one by the cacophony of religion, and lastly, the serenity of nature.

With EYEN’s vending machine, you can literally buy a font file! Just pay the machine and you get an authentic piece of Arabic calligraphy, and in turn, you support a slowly dying craft.

Sahar Madanat Design Studio’s Press Fit gathered a lot of attention for being one of the few exhibits that showcases design as a problem solving tool.

Ever wanted your own miniature fermentation setup? The Brinery is designed to simplify the fermentation and marination process. Plus, the food created in it helps diversify the healthy bacteria in your intestines!

Andrei Visuals’ crazy motion installation uses a Microsoft Kinect and an algorithm to capture human movement and turn it into a colorful painting. People spent hours dancing in front of this screen!

What you’re looking at is a completely new material. Kutleh (Arabic for block) is made by joining together spare/waste pieces of stone to create this layered material that can be used for sculpting and machining. Doesn’t it look incredible?

Yasmeen Sabri’s traditional swing was a hit among the public. Using just wood and rope, and with a cleverly designed IKEA-esque assembly manual, anyone can make one of their own.

Catching all eyes as you enter the Hangar is the Left of Passage, Right of Passage, an installation by Anmahian Winton Architects that you can walk through. The installation mimics the passages of Wadi Rum’s sandstone walkways.

‬Aperçu’s Mirage uses stone, crystals, and resin to create some wonderful showpieces that looked great from afar and even better up close.

Ammar Kalo showcased his unique and mystifying furniture, made from unconventional techniques.

Hanna Salameh returns to ADW with the Flo Desk, a wonderfully layered desk that looks like it’s been stacked together.

Crystallization is usually accidental in ceramic baking. What if you turn an accident into art? My opinion is it looks much better!

Hashem Joucka’s experiments with ferrofluid and oil paints yielded some incredibly interesting results!

Right across the road from the Hangar was Amman Design Week’s Cultural zone. A part that showcased handicrafts in a commercial light, while even having a dedicated space for reviving dying crafts from within and outside Jordan. What you see below is a look at the Cultural Plaza, a place to conduct design seminars, held below a rather beautiful bamboo strip ceiling, and the Crafts Hub a place that revived crafts like Bedouin felt-making, traditional Syrian Arabesque Mosaic making, Jordanian Stone Mosaic making, and swordsmithing. If the Hangar showcased the future of design, the Crafts District helped give it context in many ways.

We end our tour of the Amman Design Week on a happy note. With news that only months back, the Jordanian Government withdrew its ban on 3D Printers, the country rushes to embrace the technology. Designers Sahar Madanat and Sara Bdeir talk about how industrial processes integral to design like metal fabrication, electronic integration, and plastic molding haven’t really caught on in the Middle East (forcing most designers to take up more traditional practices like furniture or textile design or to practice abroad), but the future looks bright as designers are working hard to bring talent as well as industries to the country, with the legalization of 3D printing just being the very beginning of what I can imagine is a very bright future for Design and Life in Amman and Jordan. So how do you get an entire country to talk about design? You do it the way Amman Design Week did it!

Image Credits © Amman Design Week 2017 & Yanko Design.